Error Code E IS
Icing Room Sensor Error / Ice Maker Sensor Error
Moderate
Address soon - your appliance may not work properly
How to Fix
- 1
1. Check CON3 connector (Pin 10 to Pin 9) for loose or disconnected connection between Main PCB and ice/icing sensor.
- 2
2. If connector is loose or disconnected, reconnect or repair the connector and retest.
- 3
3. Measure sensor resistance at CON3 Pin 10 to Pin 9. If resistance reads 0 ohms (short circuit), replace the sensor.
- 4
4. Measure sensor resistance at CON3 Pin 10 to Pin 9. If resistance reads open/infinite (open circuit), proceed to step 5.
- 5
5. Compare measured resistance against the temperature-resistance table. If out of range, replace the sensor.
- 6
6. If resistance is within range, explain to customer that the unit is functioning normally.
- 7
7. Check the sensor connection. If the sensor connection is abnormal, replace the refrigerator sensor. If abnormal, reconnect or repair the connector.
This Error Applies To
LG LCFC26XSS Series Refrigerators